LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> A7 Quattro Premium >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Cooling Systems >> Cooling System (6-Cylinder Direct Fuel Injection 2.9L; 3.0L 4V TFSI Engine Ea 839) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Left Front Coolant Pipe, Removing And Installing, 3.0L Engine >> Removing

Left Front Coolant Pipe, Removing And Installing, 3.0L Engine: Removing

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Remove the A/C compressor ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .

-- Remove the A/C compressor from the bracket and tie it up on the left side. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING ON BRACKET .

-- Remove the lock carrier cover. Refer to OVERVIEW - BUMPER COVER .

-- Remove the left and right headlamp cover -1- upward in direction of -arrows-.

GWWA94-12283Courtesy of AUDI OF AMERICA, LLC

-- Release the retainers in direction of -arrows- and remove the upper air duct -1-.

GWWA19-12822Courtesy of AUDI OF AMERICA, LLC

-- Release the left and right catches in direction of -arrows- and remove the retaining pin -1- for the radiator upward.

GWWA19-12319Courtesy of AUDI OF AMERICA, LLC

-- Move the radiator slightly forward.

-- Remove the bolts -arrows- and remove the left front coolant pipe from the coolant pump.

GWWA19-12531Courtesy of AUDI OF AMERICA, LLC