LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> A7 Quattro Premium >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Cooling Systems >> Cooling System (6-Cylinder Direct Fuel Injection 2.9L; 3.0L 4V TFSI Engine Ea 839) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Left Coolant Pipe On SUBFRAME, Removing And Installing >> Removing

Left Coolant Pipe On SUBFRAME, Removing And Installing: Removing

2.9L Engine:

-- Lower the subframe. Refer to SUBFRAME, LOWERING .

3.0L Engine:

-- Remove the left engine mount. Refer to LEFT ENGINE MOUNT, REMOVING AND INSTALLING, 3.0L ENGINE .

Remove the bolts -arrows-.

GWWA19-12761Courtesy of AUDI OF AMERICA, LLC

Continuation for All:

-- Place a cloth underneath to catch any escaping coolant.

-- Clamp off the coolant hoses using the Hose Clamps - Up To 25mm :3094  .

-- Loosen the hose clamp -1-, lift the clamp -2- and remove the coolant hoses.

-- Remove the left coolant pipe.