Left Coolant Pipe On SUBFRAME, Removing And Installing: Installing

Install in the reverse order of removal while noting the following:

• Replace the seal and O-ring after removal.
• Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.
• Used coolant cannot be used again.

-- If removed, install the subframe. Refer to SUBFRAME, LOWERING .

-- If removed, install the left engine mount. Refer to LEFT ENGINE MOUNT, REMOVING AND INSTALLING, 3.0L ENGINE .

-- Connect the coolant hose to the connector coupling. Refer to Figure.

-- Fill the coolant. Refer to Coolant, Filling .