Large Right Rear Coolant Pipe, Removing And Installing, 2.9L Engine: Installing

Install in the reverse order of removal while noting the following:

• Replace the O-rings after removing them.
• Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.
• Used coolant cannot be used again.

-- Coat the new O-rings with coolant.

-- Install the right catalytic converter. Refer to CATALYTIC CONVERTER, REMOVING AND INSTALLING, 2.9L ENGINE WITHOUT PARTICULATE FILTER .

-- Fill the coolant. Refer to Coolant, Filling .