Refrigerant Lines, Disconnecting And Connecting At Condenser, RS 6/ RS 7: Installing

Install in reverse order of removal. Note the following:

-- Clean the refrigerant line connections on the condenser and on the refrigerant lines and check for damage.

-- Replace the O-rings. Refer to REFRIGERANT CIRCUIT SEALS .

-- Insert the refrigerant lines in the connections on the condenser.

-- Check the routing of the refrigerant lines after attachment. They must be inserted in the provided brackets in a tension-free manner and must not come in contact with other components.

-- Evacuate and charge the refrigerant circuit. Refer to Refrigerant Circuit or Working with A/C Service Station (1 Of 2) / Working with A/C Service Station (2 Of 2) .

-- Operate the A/C system after charging the refrigerant circuit. Refer to A/C SYSTEM, STARTING AFTER CHARGING REFRIGERANT CIRCUIT .