Refrigerant Lines, Disconnecting And Connecting At Condenser, 4-Cylinder S6/S7 TFSI: Installing
Install in reverse order of removal. Note the following:
-- Clean the refrigerant line connections on the condenser -C- and on the refrigerant lines -A and E- and check for damage.
-- Replace the O-rings -B and D-. Refer to REFRIGERANT CIRCUIT SEALS .
-- Insert the refrigerant lines in the connections on the condenser.
-- Check the routing of the refrigerant lines after attachment. They must be inserted in the provided brackets in a tension-free manner and must not come in contact with other components.
-- Evacuate and charge the refrigerant circuit. Refer to Refrigerant Circuit or Working with A/C Service Station (1 Of 2) / Working with A/C Service Station (2 Of 2) .
-- Operate the A/C system after charging the refrigerant circuit. Refer to A/C SYSTEM, STARTING AFTER CHARGING REFRIGERANT CIRCUIT .