Overview - Assembly Mounts
WARNING: This page is about a different car, the 2024 Audi S7, 2024 Audi RS 7 Sportback, 2023 Audi S7, and 2023 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 55 Nm
- Tunnel Crossmember
- Removing and installing. Refer to TUNNEL CROSSMEMBER, REMOVING AND INSTALLING .
- Stop
- For the transmission mount
- Transmission Mount
- Removing and installing. Refer to approrpriate Service Information .
- Nut
- 20 Nm
- Only remove if the transmission mount must be separated from the transmission support
- Bolt
- 20 Nm
- Only remove if the transmission mount must be separated from the transmission support
- Transmission Support
- Removing and installing. Refer to .
- Bolt
- 40 Nm
- Bolt
- 20 Nm +90°
- Replace after removing
- Only remove if the transmission mount must be separated from the transmission support
- Nut
- 20 Nm