Bleed Pipe Length, Measuring on and Shortening if Necessary

Fig 1: Identifying Shortening Pipe On Adapter For Oil Filling VAS 6262 A

Courtesy of AUDI OF AMERICA, LLC

The pipe must be shorted to dimension -a- so that the bleed pipe on the adapter for the :VAS6262A  does not touch the bottom on some containers.

• Dimension -a- = 210 mm

-- Dimension -a- is measured starting from the shaft (the green surface in the magnified area) on the adapter for the :VAS6262A  .

-- Mark the dimension on the bleed pipe and shorten it using the :VAS6056/2  .

Fig 2: Cutting Pipe

Courtesy of AUDI OF AMERICA, LLC

-- Clean the :VAS6262A  .