ATF Lines, Removing And Installing: Clean
WARNING: This page is about a different car, the 2024 Audi S7, 2024 Audi RS 7 Sportback, 2023 Audi S7, and 2023 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
- Guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .
-- Before installing a replacement transmission, always clean out the ATF cooler and ATF lines using compressed air (maximum 10 bar (145.03 psi)).
-- Place the :SMN372500 under the transmission.
- If extremely dirty ATF flows out when cleaning using compressed air, flush the ATF cooler and lines using clean ATF.
Tightening Specifications
- Refer to OVERVIEW - NOISE INSULATION .