ATF Cooler, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi S7, 2024 Audi RS 7 Sportback, 2023 Audi S7, and 2023 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- Secure all hose connections with hose clamps corresponding to series production. Refer to the Parts Information.
-- Connect the ATF line all the way and secure using the clips.
- Any leaking ATF lines must be replaced.
- Replace bent or stretched clips.
- The clips must be secure.
-- Check the ATF level. Refer to ATF LEVEL, CHECKING .