Cylinder Bank 2 (Left) Camshaft Housing, Removing And Installing: Notes

Special tools and workshop equipment required 

• Sliding Hammer :T10133/3  from the Injector/Combustion Chamber Seal Tool Set :T10133C 
  Fig 1: Identifying Injector/Combustion Chamber Seal Tool Set

  Courtesy of AUDI OF AMERICA, LLC
• Camshaft Adjustment Pins :T40060  (with the engine installed)
  Fig 2: Camshaft Adjustment Pins T40060

  Courtesy of AUDI OF AMERICA, LLC
• Locating Pins :T40116 
  Fig 3: Identifying Locating Pins T40116

  Courtesy of AUDI OF AMERICA, LLC
• Hand drill with plastic brush insert
• Protective Eyewear
• Sealant. Refer to the Parts Information.
• M8x25 Bolts (quantity 2)