Crankshaft, Removing And Installing: Notes

Special tools and workshop equipment required 

• Puller - Unit Injector :T10055 
  Fig 1: Puller - Unit Injector

  Courtesy of AUDI OF AMERICA, LLC
• Screwdriver :T10248  , not illustrated
• Locking Pin (3 pc.) :T40011 
  Fig 2: Identifying Locking Pin T40011

  Courtesy of AUDI OF AMERICA, LLC
• Extracting Tool :T40332 

  Courtesy of AUDI OF AMERICA, LLC

• Locking Tool :T40362  , not illustrated

Prepare the Extracting Tool :T40332 

Fig 3: Puller

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the pull rod -1- with the bolts -arrows- as shown on the puller cross bar Extracting Tool : T40332  .

-- Remove the threaded pins -2- for later assembly of the tool.