Right Coolant Pipe On SUBFRAME, Removing And Installing: Removing

-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- Remove the right drive axle cover and right front wheel spoiler. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .

-- Loosen the right front wheel housing liner in the front area and push toward the side. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .

-- Place a cloth underneath to catch any escaping coolant.

Courtesy of AUDI OF AMERICA, LLC

-- Clamp off the coolant hoses with the Hose Clamps - Up To 25mm :3094  and then remove.- To remove, loosen the hose clamps -1 and 5-.

-- Free up the wiring duct -4- on the right coolant pipe and on the subframe.

-- Remove the nut -2- and the bolt -3-.

-- Lower the subframe. Refer to SUBFRAME, LOWERING .

-- Remove the right coolant pipe.