Spoiler Cover, Removing And Installing: Installing
Install in the reverse order of removal while noting the following:
- The vehicle and the spoiler cover must be at room temperature.
- The adhesive surfaces must be free of dirt and grease.
-- Remove the adhesive residue from the body.
-- Clean the painted side of the adhesive surface with Cleaning Solution :D 009 401 04 and let dry.
-- Fold back the end of the protective film, or attach a pulling aid to the protective film.
-- Apply and press the spoiler cover -1- on.
- The clips -arrows- must click into place.
-- Remove the protective film from the adhesive tape -2- and press the cover on.
- Resting time approximately 30 minutes at room temperature