Overview - Bumper Carrier

Fig 1: Overview - Impact Member

Courtesy of AUDI OF AMERICA, LLC

1. Bumper Carrier, Equipment Version without Trailer Hitch
   1. Bumper Carrier
      • Removing and Installing. Refer to BUMPER CARRIER, REMOVING AND INSTALLING, EQUIPMENT VERSION WITHOUT TRAILER HITCH .
   2. Bolt
      • Always replace after removing
      • Quantity: 3
      • Tightening specification and sequence. Refer to Fig 2.
   3. Foam Seal
   4. Nut
      • 55 Nm
   5. Foam Seal
   6. Bolt
      • Always replace after removing
      • Tightening specification and sequence. Refer to Fig 2.
      • Quantity: 3
   7. Towing eye
2. Bumper Carrier, Equipment Version with Trailer Hitch
   1. Socket
      • Removing and installing. Refer to the appropriate service information .
      • Connector assignment. Refer to the appropriate service information .
   2. Filler Piece
      • Left
   3. Bumper Carrier
      • Removing and Installing. Refer to BUMPER CARRIER, REMOVING AND INSTALLING, EQUIPMENT VERSION WITH TRAILER HITCH .
   4. Grommet
   5. Bolt
      • Always replace after removing
      • Tightening specification and sequence. Refer to Fig 3.
   6. Bolt
      • Always replace after removing
      • Tightening specification and sequence. Refer to Fig 3.
   7. Bolt
      • Always replace after removing
      • Tightening specification and sequence. Refer to Fig 3.
   8. Bolt
      • Always replace after removing
      • Tightening specification and sequence. Refer to Fig 3.
   9. Filler Piece
      • Right
   10. Towing Eye

Bumper Carrier without Trailer Hitch - Tightening Specification and Sequence

Fig 2: Impact Member without Trailer Hitch - Tightening Specification and Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts and nuts in the order shown.

Bumper Carrier with Trailer Hitch - Tightening Specification and Sequence

Fig 3: Impact Member with Trailer Hitch - Tightening Specification and Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts in the sequence shown.