Overview - Backrest Cover And Cushion, Fixed Backrest

Fig 1: Exploded View Of Cover & Cushion, Fixed Rear Seat Backrest

Courtesy of AUDI OF AMERICA, LLC

1. Cover
   • Covers and Cushions, Removing and Installing. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, FIXED BACKREST .
   • Cover and Cushion, Separating. Refer to COVER AND CUSHION, SEPARATING .
   • Check that there are no folds after installing
2. Wire
   • Encapsulated in cushion
   • For securing the cover to the cushion
3. Contour Wire
   • Sewn into cover
   • For securing the cover to the cushion
4. Upholstery Clip
   • For securing the cover to the cushion
   • Always replace after removing
   • Install at the same location with Upholstery Clip Pliers :V.A.G 1634  .
5. Cushion
   • Covers and Cushions, Removing and Installing. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, FIXED BACKREST .
   • Cover and Cushion, Separating. Refer to COVER AND CUSHION, SEPARATING .
   • Versions with seat heating: attach a new heating element when replacing. Refer to BACKREST HEATING ELEMENT, REMOVING AND INSTALLING .
6. Backrest Frame