CUPHOLDER, Removing And Installing: Removing
-- Move the front seats as far back as possible.
-- Remove the center console insert side trim. Refer to CENTER CONSOLE INSERT SIDE TRIM, REMOVING AND INSTALLING .
-- Remove the center console decorative trim. Refer to Center Console Decorative Trim, Removing and Installing .
-- Remove the inner trim panels from the center console. Refer to CENTER CONSOLE INNER CENTER TRIM, REMOVING AND INSTALLING .
-- Remove the center console insert. Refer to Center Console Insert, Removing and Installing .
-- Remove the rear trims. Refer to Center Console Rear Trim, Removing and Installing .
-- Remove the front storage compartment in the center console. Refer to CENTER CONSOLE FRONT STORAGE COMPARTMENT, REMOVING AND INSTALLING .
-- Remove the left or right center console side trim panel. Refer to CENTER CONSOLE SIDE TRIM PANEL, REMOVING AND INSTALLING .
-- Remove the center console upper support. Refer to CENTER CONSOLE UPPER SUPPORT, REMOVING AND INSTALLING .
-- Disconnect the connectors.
-- Unclip the wiring harness and free it up.
-- Remove the bolts -2- and -4-.
-- Pull the center console side trim panel -3- carefully toward the rear -arrow- and remove the cupholder -1- upward.
-- Unclip the Access/Start System Antenna 1 in Vehicle Interior -R138- from the bracket.
-- Remove the cupholder -1-.