Diagnostic Entries

Diagnostic entry with the Vehicle Diagnostic Tester.

• Turn on and connect the Vehicle Diagnostic Tester.
• Switch the ignition on.
• Select "Diagnostic" operating mode and "Start diagnostics".
• Select the "Test plan" tab.
• Select the "individual test" button and select the following tree structure, one item after another, for the corresponding component/control module.

Test programs according to component/control module

• 1. J234 Airbag Control Module, Removing and Installing
• 2. J234 Airbag Control Module, Replacing
• 3. J706 Seat Occupant Detection System Control Module, Replacing
• 4. Reversible Seat Belt Tensioner, Replacing

1. J234 Airbag Control Module, Removing and Installing

• 0015 - Airbag Control Module - J234
• 0015 - Airbag, functions
• 0015 - Basic setting
• 0015 - Inertial sensors basic setting

2. J234 Airbag Control Module, Replacing

• 0015 - Airbag Control Module - J234
• 0015 - Airbag, functions
• 0015 - Airbag Control Module, Replacing

3. J706 Seat Occupant Detection System Control Module, Replacing

• 0015 - Airbag Control Module - J234
• 0015 - Airbag, functions
• 0015 - Basic setting
• J706 - Control module, seat occupant detection system, basic setting

4. Reversible Seat Belt Tensioner, Replacing

• 0015 - Airbag Control Module - J234
• 0015 - Airbag, functions
• 0015 - LIN Participant
• J234 - Seat Belt Tensioner Control Module, Basic Setting
• J234 - Left Seat Belt Tensioner Control Module, Output Diagnostic Test Mode
• J234 - Left Rear Seat Belt Tensioner Control Module, Output Diagnostic Test Mode
• J234 - Right Rear Seat Belt Tensioner Control Module, Output Diagnostic Test Mode