Condensation Water Drain, Removing And Installing: Installing
Install in the reverse order of removal while noting the following:
-- Install both condensation water drain hoses -B- so that they are not twisted or crushed (different versions for the left and right side). Refer to the Parts Information.
-- Insert the condensation water drain hose -B- and push with pretension into the floor panel -F-.
-- Make sure the carpet does not push up against the condensation water drain hose -B- when installing.
-- If a condensation water drain hose -B- fits too loose on the heater and A/C unit condensation water drain -A-, secure it with a clamp, for example, so that it cannot slide off.