Air Intake Manifold From Heater And A/C Unit, Removing And Installing: Installing

Reinstall in reverse order of removal. Note the following:

-- Check the insulation -E- in the evaporator housing -D- of the heater and A/C unit for damage, contamination (odor) and the correct installation.

-- Check the connection locations between the air intake housing -C- and the evaporator housing -D- of the heater and A/C unit (groove/ spring connection) for damage.

• Damaged or improperly joined connections can result in noises during operation.
• The smallest leak on the groove / spring connection may cause whistling noise due to escaping air.

-- Install the front heater and A/C unit. Refer to HEATER AND A/C UNIT, REMOVING AND INSTALLING .