Plenum Chamber Water Drain, Cleaning
Special tools and workshop equipment required
- Suction Feed Spray Gun:VAG1538
- Suction Feed Spray Gun - Nylon Probe:VAG1538/2
- Flexible gripping tool
Procedure
-- Remove the plenum chamber cover. Refer to PLENUM CHAMBER COVER, REMOVING AND INSTALLING .
-- Remove large contaminants in the plenum chamber and on the water drain openings with a flexible gripping tool.
-- Remove the small contaminants with the Suction Feed Spray Gun:VAG1538 and Suction Feed Spray Gun - Nylon Probe: VAG1538/2 or remove a thin washer fluid hose.