Side Cushion Without Thorax Airbag, Removing And Installing: Removing
-- Fold the rear seat backrest forward.
-- Unclip the cover -1- using the Trim Removal Wedge:3409 -arrows-.
-- Remove the rear bench seat. Refer to BENCH SEAT/SINGLE SEAT, REMOVING AND INSTALLING .
-- Remove the nut -arrow A-.
-- Hold the seat belt to the side and remove the side cushion -1- from the threaded pins.
-- Fold the rear seat backrest slightly forward.
-- Disengage the side cushion on the C-pillar trim panel.
-- Press the side cushion upward -arrow B- and disengage from the threaded pin -arrow C-.