Center Cushion, Removing And Installing, Upper: Removing
-- Remove the center backrest headrest guides. Refer to HEADREST GUIDE, REMOVING AND INSTALLING, CENTER REAR SEAT BACKREST .
-- Remove the trim -1- using the Pry Lever:80-200 -arrow-.
-- Unclip the center cushion upward from the pass-through -arrows- using the Trim Removal Wedge:3409 .
-- Insert the Pry Lever:80-200 between the cushion and trim panel in the location shown.
-- Unclip the center cushion -1- upward from the front of the pass-through -arrows- using the Pry Lever:80-200 .