Backrest Heating Element, Removing And Installing
The old heating elements remain on the cushion and will be covered over by the new heating elements.
Procedure
- Cover and cushion separated. Refer to COVER AND CUSHION, SEPARATING .
-- Align the new heating element -arrow- on the cushion.
-- Peel the protective film off the heating element one after the other. Be careful not to damage the heating element.
-- Glue the heating element so that it aligns with the old heating element and is not wrinkled.
-- Route the connecting wires to the individual heating elements in the base of the gaps.
TIP:
The Standard/Sport seat in leather is shown.
Further installation is performed in reverse order of the removal.