Electric Drive (High-Voltage Battery)

• 93 Electric Drive
  • Safety Precautions
  • Warning Label
    • Warning Label, Checking
  • High-Voltage Battery Unit
    • OVERVIEW - High-Voltage Battery 1 -AX2-
    • Average Cell Voltage, Determining
    • Battery Modules, Charging And Discharging
    • High-Voltage Battery 1 -AX2- LEAK TEST
      • Calibration Preparation - High-Voltage Battery Leak Test, Section 1
      • Calibration Preparation - High-Voltage Battery Leak Test, Section 2
      • Battery Housing Layer 1 And 2 Leak Test
      • Coolant Circuit Leak Test
    • High-Voltage Battery 1 -AX2- LEAK DETECTION
    • High-Voltage Battery 1 -AX2-, REMOVING AND INSTALLING
      • Notes
      • Removing
      • Installing
      • Tightening Specifications
    • High-Voltage Battery 1 -AX2-, LIFTING
    • High-Voltage Battery Impact Guard, Removing And Installing
      • Notes
      • Removing
      • Installing
      • Tightening Specifications
    • Battery Regulation Control Module -J840-, REMOVING AND INSTALLING
      • Notes
      • Removing
      • Installing
      • Tightening Specifications
    • High-Voltage Battery Control Module -SX6-, REMOVING AND INSTALLING
  • High-Voltage Battery Components
    • OVERVIEW - High-Voltage Battery 1 -AX2-
      • OVERVIEW - High-Voltage Battery 1 -AX2- LAYER 1
      • OVERVIEW - High-Voltage Battery 1 -AX2- LAYER 2
      • Battery Housing Cover, Tightening Specifications, Layer 1
    • OVERVIEW - High-Voltage Battery Control Module -SX6-
    • Component Location Overview - Battery Modules
    • Component Location Overview - Battery Connector
    • High-Voltage Battery 1 - AX2- VISUAL INSPECTION AND CLASSIFICATION
    • Battery Modules, Battery Connector, Making
    • Battery Housing Cover Reworked Screws, Handling
    • Battery Housing Cover, Removing And Installing
      • Cover For Battery Housing Layer 2, Removing And Installing
        • Notes
        • Removing
        • Installing
        • Tightening Specifications
      • Cover For Battery Housing Layer 1, Removing And Installing
        • Notes
        • Removing
        • Installing
        • Tightening Specifications
      • WEDGE INSERT Plastic Wedge Set:VAS852015 WITH LIMITED PENETRATION DEPTH
      • Notes For Processing Two-Part Adhesive For High-Voltage Battery
    • Battery Housing Layer 2, Removing And Installing
      • Notes
      • Removing
      • Installing
      • Tightening Specifications
    • Battery Module, Removing
    • Battery Module, Installing
    • High-Voltage Battery 1 -AX2- PRELIMINARY OPERATION
    • High-Voltage Battery 1 -AX2- COMMUNICATION WIRING HARNESS, REMOVING AND INSTALLING
      • Notes
      • High-Voltage Battery 1 -AX2- COMMUNICATION WIRING HARNESS, REMOVING, LAYER 2
      • High-Voltage Battery 1 -AX2- COMMUNICATION WIRING HARNESS, REMOVING, LAYER 1