Upper Center Cushion, Removing And Installing: Removing

-- Remove the center headrest. Refer to Headrest, Removing and Installing .

-- Remove the backrest with pass-through. Refer to BACKREST WITH PASS-THROUGH, REMOVING AND INSTALLING .

-- Remove the side trim panels. Refer to SIDE TRIM PANEL, REMOVING AND INSTALLING .

-- Pry out the trim panel -3- from the backrest frame, out of the groove in direction of -arrows- using scraper no. 1 from the Scraper Set: VAS6845  .

Courtesy of AUDI OF AMERICA, LLC

-- Pry out the clamping strip -4- for the cover and from the backrest frame using a flat-head screwdriver.

-- Disengage the cover -2- one after the other carefully from the headrest guides -1- and remove it over the headrest guide.

-- Fold the cover -1- downward and disengage and remove the center cushion -3- from the headrest guides -2-.

Courtesy of AUDI OF AMERICA, LLC

-- To remove the cover pry out the clamping strips -arrows- using a flat-head screwdriver.