LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2023 >> S8 >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Crankshaft, Cylinder Block Servicing - 8-Cylinder 4.0L 4V TFSI Engine Ea825) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Ribbed Belt TENSIONER, Removing And Installing >> RIBBED BELT TENSIONER FOR Generator -C-, REMOVING AND INSTALLING >> Removing

RIBBED BELT TENSIONER FOR Generator -C-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2024 Audi A8 Quattro, 2023 Audi A8 Quattro, and 2022 Audi A8 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the ribbed belt from the Generator -C-. Refer to Generator -C- RIBBED BELT, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and remove the tensioner -1-.

GWWA13-11394Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals