LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2023 >> S8 >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Crankshaft, Cylinder Block 6-Cylinder 2.9L; 3.0L 4V TFSI Ea839 Engine) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Sub-Assembly Bracket, Removing And Installing >> A/C Compressor Bracket, Removing And Installing, 2.9L Engine Without Electrical Compressor >> Installing

A/C Compressor Bracket, Removing And Installing, 2.9L Engine Without Electrical Compressor: Installing

WARNING: This page is about a different car, the 2024 Audi A8 Quattro, 2023 Audi A8 Quattro, and 2022 Audi A8 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Install the ribbed belt tensioner for the A/C compressor. Refer to RIBBED BELT TENSIONER FOR A/C COMPRESSOR, REMOVING AND INSTALLING, 2.9L ENGINE .

scientia non olet · About LEMON Manuals