LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2023 >> S8 >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Crankshaft, Cylinder Block 6-Cylinder 2.9L; 3.0L 4V TFSI Ea839 Engine) >> 13 Crankshaft, Cylinder Block >> Crankshaft >> Sensor Wheel, Removing And Installing >> Installing

Sensor Wheel, Removing And Installing: Installing

WARNING: This page is about a different car, the 2024 Audi A8 Quattro, 2023 Audi A8 Quattro, and 2022 Audi A8 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- Install the drive plate. Refer to DRIVE PLATE, REMOVING AND INSTALLING .

-- If the transmission is replaced, perform the corresponding adaptations in the Guided Functions "01 - Engine electronics, functions" or "0001 - Steps after replacing component" using the Vehicle Diagnostic Tester.

scientia non olet · About LEMON Manuals