Crankshaft, Removing And Installing: Notes

WARNING: This page is about a different car, the 2024 Audi A8 Quattro, 2023 Audi A8 Quattro, and 2022 Audi A8 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Puller - Unit Injector: T10055

Fig 1: Puller - Unit Injector
Courtesy of AUDI OF AMERICA, LLC
Screwdriver: T10248 , not illustrated
Locking Pin (3 pc.): T40011

Fig 2: Identifying Locking Pin T40011
Courtesy of AUDI OF AMERICA, LLC
Extracting Tool : T40332

Courtesy of AUDI OF AMERICA, LLC
Locking Tool: T40362 , not illustrated

Prepare the Extracting Tool : T40332

Fig 3: Puller

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the pull rod -1- with the bolts -arrows- as shown on the puller cross bar Extracting Tool: T40332 .

-- Remove the threaded pins -2- for later assembly of the tool.