LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2023 >> S8 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Crankshaft, Cylinder Block 8-Cylinder Direct Injection 4.0L 4V TFSI Engine Ea825 >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Sub-Assembly Bracket, Removing And Installing >> A/C Compressor Bracket, Removing And Installing >> Removing

A/C Compressor Bracket, Removing And Installing: Removing

-- Remove the ribbed belt from the A/C compressor. Refer to A/C COMPRESSOR RIBBED BELT, REMOVING AND INSTALLING .

-- Equipment version with refrigerant R134a/R1234yf without active suspension: remove the A/C compressor from the bracket and tie it up to the side. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING ON BRACKET .

-- Versions with refrigerant R744 with active suspension: remove the A/C compressor. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING .

All additional procedures are described under: SUB-ASSEMBLY BRACKET, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals