COMPONENT LOCATION OVERVIEW - SEALS, 09R "quattro ultra"

Fig 1: Exploded View Of Final Drive Seals (09R "Quattro Ultra")

Courtesy of AUDI OF AMERICA, LLC

1. Bleed Cap
2. Circlip
   • Always replace.
3. Left Flange Shaft
   • Removing and Installing. Refer to LEFT SEAL, REPLACING, 0DB, 0D2, 0G2, 0DG, 0B0 "quattro ultra", 09R "quattro ultra" .
4. Left Protective Ring
   • Replacing. Refer to FLANGE SHAFT PROTECTIVE RING, REPLACING .
5. Left Seal
   • Replacing. Refer to LEFT SEAL, REPLACING, 0DB, 0D2, 0G2, 0DG, 0B0 "quattro ultra", 09R "quattro ultra" .
6. Circlip
7. Flange/Driveshaft
   • Removing and Installing. Refer to INPUT SHAFT SEAL, REPLACING .
8. Protective Ring on Flange/Driveshaft
   • Replacing. Refer to FLANGE/DRIVESHAFT PROTECTIVE RING, REPLACING .
9. Input Shaft Seal
   • Replacing. Refer to INPUT SHAFT SEAL, REPLACING .
10. Rear Final Drive
    • Refer to FINAL DRIVE, REMOVING AND INSTALLING 
11. Right Seal
    • Replacing. Refer to RIGHT SEAL, REPLACING, FINAL DRIVE 0B0 "quattro ultra" .
12. Right Protective Ring
    • Replacing. Refer to FLANGE SHAFT PROTECTIVE RING, REPLACING .
13. Right Flange Shaft
    • Removing and Installing. Refer to RIGHT SEAL, REPLACING, FINAL DRIVE 0B0 "quattro ultra" .
14. Shim
15. Circlip
    • Always replace.
16. Cap