Control Module, Removing And Installing: Notes

The following are integrated in the All-Wheel Drive Control Module -J492- -1- :

Fig 1: Identifying All Wheel Drive Control Module -J492- -1-

Courtesy of AUDI OF AMERICA, LLC

• All-Wheel Drive Clutch Actuator -V622-
• All-Wheel Drive Clutch Position Sensor -G969-

Replacing

• If the All-Wheel Drive Control Module -J492- should be replaced, the >>clutch adaptation values<< for the old control module must be read out now using the Vehicle Diagnostic Tester. Refer to ADDITIONAL WORK FOR VEHICLES WITH "quattro ultra" .