Check Valve With Vacuum Line In Engine Compartment, Removing And Installing, 3.0L TFSI Engine: Removing
-- Remove the air filter housing. Refer to appropriate Multiport Fuel Injection article, Air Filter; Air Filter Housing, Removing and Installing .
-- Remove the bracket for the A/C compressor. Refer to appropriate Crankshaft, Cylinder Block article, Cylinder Block, Belt Pulley Side; Sub-Assembly Bracket, Removing and Installing .
-- Remove the vacuum line -2-.
-- Remove the bolt -1-.
-- If equipped, disconnect the vacuum line -3- by pressing the release buttons on both sides.
-- Remove the bolt -2- and remove the vacuum line -1- with the check valve.