Overview - Rear Lid Tail Lamps

Fig 1: Exploded View Of Rear Lid Tail Lamps

Courtesy of AUDI OF AMERICA, LLC

1. Left License Plate Lamp -X4-
   • Cannot be replaced separately if faulty.
   • Replacing. Refer to REAR LID TAIL LAMP, REMOVING AND INSTALLING .
2. Tail Lamp
   • In the rear lid
   • Removing and Installing. Refer to REAR LID TAIL LAMP, REMOVING AND INSTALLING .
3. Cover
   • For the tail lamp
   • Removing and Installing. Refer to REAR LID TAIL LAMP, REMOVING AND INSTALLING .
4. Clip
5. Seal
   • Replace if damaged
6. Nut
   • Quantity: 8
   • Tightening specification and sequence. Refer to Fig 2.
7. Mount
8. Mount
9. Seal
   • Replace if damaged
10. Clip
11. Cover
    • For the tail lamp
    • Removing and Installing. Refer to REAR LID TAIL LAMP, REMOVING AND INSTALLING .
12. Right License Plate Lamp -X5-
    • Cannot be replaced separately if faulty.
    • Replacing. Refer to REAR LID TAIL LAMP, REMOVING AND INSTALLING .
13. Trim Molding
    • Removing and Installing. Refer to MOLDINGS, TRIMS, EXTENSIONS AND TRIM PANELS .

Tightening Specification and Sequence for the Tail Lamps

Fig 2: Tightening specification and sequence for the tail lamps

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts in steps in the sequence shown: