Guidelines For Clean Working Conditions

Thoroughly clean the connection points and the surrounding area before loosening.
Clean the transmission and transmission components using Cleaning Solution -D 009 401 04-.
Use lint-free cloths when cleaning, for example, the "X70 /" cloth made by Kimberly-Clark Professional.
Seal all open lines and connections immediately with clean plugs or caps from the Engine Bung Set:VAS6122 .
Place the removed parts on a clean surface and cover them. Use foil or lint-free cloths.
Carefully cover or seal opened components if the repair will not be done immediately.
Only install clean parts: remove the replacement parts from their packaging just before installing them.
Protect the disconnected connectors from dirt and moisture and only connect when they are dry.