Component Location Overview - Drain And Check Plugs

Courtesy of AUDI OF AMERICA, LLC

1. ATF Drain Plug
   • Tighten all the way
2. O-Ring
   • Always replace
3. Drain Plug
   • 12 Nm
   • Always replace
   • For the transmission fluid inside the transfer case
4. Plug
   • 27 Nm
   • Always replace
   • For the inspection and fill hole for gear oil in the transfer case
5. Plug
   • 30 Nm
   • Always replace
   • For the ATF check and fill hole
6. Plug
   • 27 Nm
   • For the inspection and fill hole for gear oil in the front final drive
7. Drain Plug
   • 10 Nm
   • For the gear oil inside the front final drive