LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2023 >> RS 5 >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Passenger Protection, Airbags, Seat Belts (Coupe) >> 69 Passenger Protection, Airbags, Seat Belts >> Seat Belt Fastening Detection >> Passenger Seat Occupant Detection Sensor -G128-, REMOVING AND INSTALLING >> Installing

Passenger Seat Occupant Detection Sensor -G128-, REMOVING AND INSTALLING: Installing

Install in the reverse order of removal while noting the following:

NOTE:

Make sure the connectors are pushed in all the way and that they engage audibly.

If the Airbag Indicator Lamp -K75- indicates a fault after installing, check the DTC memory, erase it and check it again using the Vehicle Diagnostic Tester.