Camshaft Position Sensor -G40-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2024 Audi A5 Quattro and 2023 Audi A5 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

All except Audi Q7/Q8:

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

Audi Q7/Q8:

Refer to the appropriate Service Information.

Continuation for All Vehicles:

Courtesy of AUDI

-- Disconnect the connector -3-.

-- Remove the bolt -1-, and remove the Camshaft Position Sensor -G40- -item 2-. (Shown with removed intake manifold.)