Cam Adjustment Actuator, Removing And Installing: Notes
WARNING: This page is about a different car, the 2024 Audi A5 Quattro and 2023 Audi A5 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Removing
All except Audi Q7/Q8:
-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
Audi Q7/Q8:
Refer to the appropriate Service Information.
-- Remove the cap -2-.
-- Release the retainer -arrow B- and remove the oil filler tube -1- upward from the air filter lower section.
-- Turn the oil filler tube counter-clockwise -arrow A- and remove it.
-- Close the oil filler tube with the cap.
Continuation for All Vehicles:
-- Cam Adjustment Actuator 1 -F366- : free up the wires and slightly push to the side.
-- Disconnect the connector -2-.
-- Remove the bolt -1- and the cam adjustment actuator.