Overview - All-Wheel Drive Clutch

WARNING: This page is about a different car, the 2024 Audi A5 Quattro and 2023 Audi A5 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

All information for the all-wheel drive clutch -1- can be found in the repair information. Refer to All-Wheel Drive Clutch .

Fig 1: All Wheel Drive Clutch Exploded View

Courtesy of AUDI OF AMERICA, LLC

All Wheel Drive Clutch
- Removing and Installing. Refer to ALL-WHEEL DRIVE CLUTCH, REMOVING AND INSTALLING .
- Servicing. Refer to All-Wheel Drive Clutch .
- ATF fluid level, checking. Refer to OIL LEVEL, CHECKING .
Bleeder
Bolt
- Quantity: 3
- M8 X 70
- Replace after removing
- 8 Nm +180°
Balance Weight
- Installed depending on the version
Bolt
- Installed depending on the version
- 28 Nm
Bolt
- Installed depending on the version
- 28 Nm
Heat Shield
- For driveshaft
- Installed depending on the version
Heat Shield
- For the All-Wheel Drive Control Module -J492-
- Installed depending on the version
Bolt
- Installed depending on the version
- 8 Nm
Bolt
- M8 X 100
- Replace after removing
- 8 Nm +180°
O-Ring
- For the All-Wheel Drive Control Module -J492-
- Replace after removing
O-Ring
- For the All-Wheel Drive Control Module -J492-
- Replace after removing
All-Wheel Drive Control Module -J492-
The following are integrated in the All-Wheel Drive Control Module -J492- :
- All-Wheel Drive Clutch Actuator -V622-
- All-Wheel Drive Clutch Position Sensor -G969-
- Removing and Installing. Refer to CONTROL MODULE, REMOVING AND INSTALLING .
Bolt
- 21 Nm