LEMON Manuals
: Even more car manuals for everyone
Home
>>
Audi
>>
2023
>>
RS 5
>>
Repair and Diagnosis
>>
External Pages
>>
Different car
>>
Section 316 (Gears, Shafts (Servicing - 7-Speed Dual Clutch Transmission 0CJ, 0CL, 0CK, 0DK, 0DN, 0DP, 0HL) (Coupe))
>>
35 Gears, Shafts
>>
Input Shaft
>>
Input Shaft 1, Removing And Installing Individually
>>
Notes
Input Shaft 1, Removing And Installing Individually: Notes
WARNING:
This page is about a different car, the 2024 Audi A5 Quattro and 2023 Audi A5 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
Two-Arm Puller
:VAS 251 001
Courtesy of AUDI OF AMERICA, LLC
Inductive Heater
:VAS 6414
Fig 1: Identifying Heater
Courtesy of AUDI OF AMERICA, LLC
Thrust Piece
:T10431/1
Fig 2: Identifying Assembly Tool T10431
Courtesy of AUDI OF AMERICA, LLC