Selector Lever Handle, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi A5 Quattro and 2023 Audi A5 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition switched off.
-- Remove the selector lever handle upper section -1- upward in direction of -arrows-.
-- Carefully pry out the selector lever boot on the side using the Trim Removal Wedge:3409 in direction of -arrow-.
-- Remove the bolt -2-.
-- Pull the selector lever handle lower section -1- upward.