ATF Level, Checking: Assembling
WARNING: This page is about a different car, the 2024 Audi A5 Quattro and 2023 Audi A5 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The ATF check and fill hole must be sealed off again before the ATF reaches 45 °C. (113 °F)
-- Tighten the plug on the inspection and fill hole or close the plugs all the way. The ATF level test is now completed.
Tightening Specifications
- Plug: Refer to -item 1- Drain and Plug.
- Refer to .