Left Rear Coolant Pipe, Removing And Installing, 3.0L Engine: Installing

Install in reverse order of removal and note the following:

• Replace the seal and O-ring after removal.
• Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.
• Used coolant cannot be used again.

-- Coat the seal and O-ring with coolant and install them.

-- Install the heat shield and engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Fill with coolant. Refer to COOLANT, DRAINING AND FILLING, 3.0L ENGINE .