Left Rear Coolant Pipe, Removing And Installing, 2.9L Engine: Installing

Install in reverse order of removal and note the following:

• Replace the seal and O-ring after removal.
• Used coolant cannot be used again.

-- Coat the seal and O-ring with coolant and install them.

-- Vehicle with particulate filter: install the left catalytic converter. Refer to CATALYTIC CONVERTER, REMOVING AND INSTALLING, 2.9L ENGINE WITH PARTICULATE FILTER .

-- Install the heat shield and engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Fill the coolant. Refer to COOLANT, DRAINING AND FILLING, 2.9L ENGINE .