Front Coolant Pipe, Removing And Installing, 2.9L Engine: Installing

Install in reverse order of removal and note the following:

• Replace the coolant pipe and O-ring after removing.
• Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.
• Used coolant cannot be used again.

-- Coat the O-ring with coolant and install it.

-- Install the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .

-- If removed, install the upper air duct pipe. Refer to AIR DUCT PIPE, REMOVING AND INSTALLING, WITH RADIATOR INSTALLED 2.9L ENGINE .

-- Fill the coolant. Refer to COOLANT, DRAINING AND FILLING, 2.9L ENGINE .