Gear Oil Cooler, Removing And Installing: Removing

Fig 1: Identifying Noise Insulation Panels

Courtesy of AUDI OF AMERICA, LLC

-- Remove the rear noise insulation -2-. Refer to NOISE INSULATION, REMOVING AND INSTALLING .

-- Place a cloth underneath to catch any leaking coolant.

Fig 2: Front Final Drive Cooler, Tightening Specification

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the coolant hoses with :3094  .

-- Loosen the clamps -1- and remove the coolant hoses.

-- Place the :SMN372500  under the transmission.

-- Remove bolt -3-, remove front final drive cooler -4-.