Right Flange Shaft, Removing And Installing: Installing

Courtesy of AUDI OF AMERICA, LLC

Install in the reverse order of removal while noting the following:

• Replace the circlip after removal.

-- Insert the circlip -1- with the :VAS5503A  .

-- Check the right flange shaft seal for damage and replace if necessary. Refer to RIGHT SEAL, REPLACING .

-- Fill the space between the sealing/dust lip halfway with Sealing Grease:G 052 128 A1  .

-- Insert the right flange shaft.

-- Fill the transmission fluid and check the level. Refer to GEAR OIL, DRAINING AND FILLING, FRONT FINAL DRIVE, TRANSMISSION WITH SEPARATED OIL SYSTEM .