Left Flange Shaft, Removing And Installing: Installing
Install in the reverse order of removal while noting the following:
- Replace bolts that were tightened with an additional turn after removing them.
-- To avoid damaging the seal, support and guide the flange shaft -arrow- when installing through the opening in the transmission.
-- Slide the left flange shaft -2- into the transmission in direction of -arrow B-. When doing this, insert the flange shaft centrally into the seal on the front differential -arrow 3-.
- Do not damage the seal -arrow 3-.
-- Install the shock absorber fork. Refer to SHOCK ABSORBER FORK, REMOVING AND INSTALLING .
-- Install the ATF cooler. Refer to ATF COOLER, REMOVING AND INSTALLING .